Georgia Electrical Contractor Class II Practice Test: 2026 PSI Prep

Buying a generic journeyman question bank is a costly mistake if your real target is Georgia licensure. Georgia does not issue a statewide journeyman electrician license. The state licenses electrical contractors as Class I (restricted) or Class II (unrestricted), and its exam tests business and regulatory knowledge as well as technical electrical work.

Use this fast buying rule: choose a Georgia electrical contractor Class II practice test only if it matches the current PSI bulletin, the official reference list, both exam sections, and the Code edition in effect for your appointment. A large bank of generic NEC questions is not enough.

What is a Georgia electrical contractor Class II practice test?

A Georgia electrical contractor Class II practice test is an exam simulation for the state's unrestricted electrical contractor credential. It should train the technical NEC routes, calculations, regulations, laws, and administrative functions listed in PSI's current Georgia candidate bulletin—not merely general electrician knowledge.

The Georgia licensing rule defines Class II as unrestricted and requires applicants to earn at least 70 on the appropriate examination. The Board's electrical contractor FAQ says approved applicants receive an Exam Approval Letter with instructions for registering through PSI.

| Match before buying | What your prep should say | Why it matters | | --- | --- | --- | | Credential | Georgia Class II, unrestricted | Class I and generic journeyman products target different scopes | | Provider | PSI | Registration, test-day rules, and the bulletin are provider-specific | | Exam structure | Business/regulatory and technical functions | NEC-only prep leaves an entire scored area exposed | | References | Current Georgia/PSI reference list | Open book only helps when you practice with permitted books | | Explanations | Code citation, calculation route, and distractor review | Answer letters alone do not repair weak reasoning |

Before paying, compare the product page with the live PSI Georgia candidate bulletin. PSI and the Board are the authorities if a course description conflicts with current rules.

Does Georgia have a journeyman electrician exam?

No statewide journeyman electrician license is issued by the Georgia electrical contractor board. Its FAQ explicitly says the Board licenses electrical contractors, not electricians. For statewide contracting authority, candidates apply for Class I restricted or Class II unrestricted licensure.

That distinction matters for search and prep. A “Georgia journeyman electrician practice test” may teach useful NEC fundamentals, but it does not prove alignment with Georgia's contractor examination. Class II candidates also need the regulations, laws, administrative functions, project-management concepts, and reference-navigation skills named in the official outline.

If you are still deciding which credential applies, use the state's electrical contractor application guide before buying exam prep. It explains the application route, while Board Rule 121-3-.01 defines the experience requirements and license scope.

What is the difference between Georgia Class I and Class II?

Class I is restricted to single-phase electrical installations that do not exceed 200 amperes at the service drop or service lateral. Class II is unrestricted. Class II applicants must document experience with installations beyond the Class I limitation, so the prep product must match the approved license class.

| License class | Scope in Georgia rules | Prep decision | | --- | --- | --- | | Class I restricted | Single-phase installations up to 200 amperes at the service | Use a current Georgia Class I outline and simulation | | Class II unrestricted | No Class I phase/amperage restriction | Use Class II technical coverage and calculations |

Do not choose Class II merely because it sounds more valuable. The Board reviews each application and experience record. Apply for the class your documented experience supports, wait for approval, and then reproduce that exact test in practice.

What does the Georgia Class II exam cover?

The current PSI outline divides the exam into regulations, laws, and administrative functions and technical functions. Technical coverage extends beyond basic NEC lookups to circuits, controls, equipment, transformers, motors, generators, special occupancies, calculations, and troubleshooting.

The bulletin currently allocates 30 scored questions to regulations, laws, and administrative functions and 110 scored questions to technical functions. Because bulletins change, verify the question count, time allowance, pretest questions, reference policy, and fees directly in the current PSI document before scheduling or simulating an exam.

Build your study map around these categories:

• Georgia rules and business: licensing law, permits, safety, insurance, estimating, contracts, bookkeeping, scheduling, and project administration.
• Core NEC navigation: definitions, branch circuits, feeders, services, overcurrent protection, conductors, wiring methods, grounding, and bonding.
• Class II technical depth: three-phase systems, motors, generators, transformers, controls, calculations, and equipment applications.
• Special conditions: hazardous locations, special occupancies, special equipment, and rules that modify the general Code route.
• Plan and specification work: interpreting drawings, organizing work, materials, submittals, and job planning.

Use focused repair drills for weak areas. The NEC grounding and bonding practice test, Table 310.16 ampacity guide, and conduit fill calculation walkthrough help isolate common technical routes before another full simulation.

How should you practice for the PSI open-book exam?

Treat open book as a retrieval test. For each question, identify the subject, predict the controlling reference, locate the exact rule under a timer, answer, and record why the route was fast or slow. Reading books cover to cover is a poor substitute for timed retrieval.

Use this loop for every 20-question block:

1. Read the stem once and identify what is being sized, protected, installed, calculated, or regulated.
2. Predict the NEC article, Georgia rule, or business reference before opening a book.
3. Start a lookup timer and find the controlling passage—not merely a related index entry.
4. Answer without viewing the explanation.
5. Record accuracy, lookup time, reference used, and confidence.
6. Count unsupported guesses as misses.
7. Retest the same route with a fresh question within 48 hours.

Practice only with references and markings allowed by the current bulletin. A legal reference setup that you know well beats an over-tabbed stack you have barely used. The NEC Code book lookup practice plan develops retrieval speed, while the open-book NEC exam time-management guide helps you set skip and return thresholds.

How do you choose the best Georgia Class II test prep?

Choose the smallest product that proves current Georgia alignment, covers both exam sections, provides realistic timed simulations, and explains every answer through the controlling reference. Question count is secondary to freshness, coverage, and explanation quality.

Ask the seller these questions before checkout:

• Is this specifically for Georgia Class II unrestricted electrical contractor licensure?
• When was it last checked against the PSI Georgia bulletin and official reference list?
• Are regulations, laws, and administrative functions included—not just NEC questions?
• Does the simulation reproduce the current section timing and question mix?
• Do explanations identify the controlling Code section, table, rule, or business reference?
• Can scores and guesses be filtered by category so weak routes are visible?

| Feature | Strong signal | Walk away when | | --- | --- | --- | | Georgia alignment | Names Class II and current PSI source | Says only “master” or “journeyman electrician” | | Full coverage | Separate business/regulatory and technical drills | Offers NEC questions only | | Current references | Lists the applicable edition and revision date | Hides editions or mixes Code cycles | | Real simulations | Discloses timing and category distribution | Every quiz is short and untimed | | Explanations | Shows lookup route and calculation steps | Gives only the correct letter | | Updates | Has a visible bulletin-check policy | Claims lifetime access without revision dates |

Start with the free diagnostic to expose weak technical categories. Then use the structured journeyman electrician exam prep tools for timed NEC practice and worked explanations, while keeping Georgia-specific business and regulatory study tied to the official references.

What is a practical 21-day Georgia Class II prep plan?

Spend week one mapping the official outline and repairing your weakest technical routes, week two integrating business and regulatory material, and week three taking fresh simulations under current PSI conditions. Save at least two unused full-length sets for the final week.

| Days | Main work | Evidence of progress | | --- | --- | --- | | 1 | Verify approval, bulletin, references, and class | One current exam checklist | | 2–4 | Timed diagnostic plus two weakest NEC categories | Fewer route and calculation errors | | 5–7 | Motors, transformers, controls, and three-phase work | Correct table/formula selection | | 8–10 | Georgia law, licensing rules, safety, and permits | Faster reference retrieval | | 11–13 | Estimating, contracts, insurance, accounting, scheduling | Category scores above target | | 14 | Mixed half-length simulation | Stable pace across both domains | | 15–17 | Repair repeat misses with fresh questions | No repeated failure pattern | | 18 | Full simulation in allowed reference setup | Finish with review time | | 19 | Target the two lowest categories | Fresh-question improvement | | 20 | Final unused simulation | Passing score with a safety margin | | 21 | Light lookup review and test-day checklist | Materials and route confirmed |

Your error log should use five labels: wrong reference, missed rule or exception, bad calculation setup, reading error, and time-management error. For every miss, write one trigger such as “motor branch-circuit conductor question: begin with Article 430 and identify which component is being sized.” Then solve a new question that requires the same route.

When are you ready for the Georgia Class II exam?

You are ready when you can clear the required score on multiple fresh, correctly weighted simulations; finish both sections under the current limits; explain your guesses; and navigate only the references allowed by PSI. One lucky passing score is not reliable evidence.

Use this final checklist:

• The Board approved you for Class II and your Exam Approval Letter is still valid.
• Your practice follows the current PSI bulletin and official reference list.
• You have studied regulations, laws, and administrative functions as seriously as NEC material.
• Three fresh timed scores clear 70 with a safety margin.
• Guesses and slow correct answers are reviewed alongside misses.
• Your reference tabs, markings, calculator, and materials follow current rules.
• You can skip a time sink and return without destroying your pace.
• Your repeated errors are shrinking across technical and business categories.

FAQ

Does Georgia have a state journeyman electrician license?

No. The Georgia State Board of Electrical Contractors says it licenses electrical contractors, not electricians. Statewide applicants choose Class I restricted or Class II unrestricted contractor licensure. Local employers or jurisdictions may still use journeyman as a job or qualification term.

What is the difference between Georgia Class I and Class II electrical contractor licenses?

Class I is restricted to single-phase electrical installations that do not exceed 200 amperes at the service drop or lateral. Class II is unrestricted. Choose practice questions for the class the Board approved you to test for.

Who administers the Georgia electrical contractor exam?

PSI administers the exam after the Georgia Board approves an applicant. The Board sends an Exam Approval Letter with registration instructions; the approval is valid for one year.

What score is required on the Georgia electrical contractor exam?

Georgia Board Rule 121-3-.01 requires a minimum score of 70 on the appropriate examination. Confirm scoring and scheduling details in the current PSI bulletin before testing.

What should a Georgia Class II practice test include?

It should separately cover regulations, laws, and administrative functions plus technical functions; use the current official reference list; explain Code routes and calculations; and reproduce PSI timing and open-book rules.