Massachusetts Journeyman Electrician Practice Test: 2026 PSI Prep

A generic NEC quiz can produce a passing score and still leave you exposed on the Massachusetts journeyman electrician exam. Massachusetts uses two separately timed parts. The second includes schematics, troubleshooting, Massachusetts amendments, and licensing rules—not just national Code lookups.

The fastest decision rule is simple: choose a Massachusetts journeyman electrician practice test only if it trains both official parts separately. Your full mocks should use 80 questions in 180 minutes for Part I and 30 questions in 60 minutes for Part II, with a 70% target on each. Anything else is a topic quiz, not a realistic Massachusetts simulation.

What is the Massachusetts journeyman electrician exam format?

The Massachusetts PSI journeyman examination has two parts. Part I contains 80 questions, allows 180 minutes, and requires 56 correct answers. Part II contains 30 questions, allows 60 minutes, and requires 21 correct answers. Treat them as two distinct tests because their topic mix and pace differ.

A Massachusetts journeyman electrician practice test is a timed question set aligned to the current Massachusetts Candidate Information Bulletin, including the Code-heavy Part I and the applied, calculation, plan-reading, troubleshooting, amendment, and licensing topics in Part II.

The official Massachusetts Candidate Information Bulletin is the controlling source for format and permitted references. Massachusetts also says that, as of June 1, 2025, applications must be submitted online to PSI; use the state's individual electrical license application page for the current process.

| Exam part | Questions | Time | Passing score | Practice priority | | --- | ---: | ---: | ---: | --- | | Part I | 80 | 180 minutes | 70% / 56 correct | NEC navigation, Massachusetts amendments, Board rules and law | | Part II | 30 | 60 minutes | 70% / 21 correct | Calculations, plans, materials, troubleshooting, amendments and licensing |

Download the bulletin when you begin studying and again before your appointment. Exam references and rules can change; an old course page is not authority.

What should a Massachusetts practice test cover?

A useful practice test should reproduce both the national-Code work and the Massachusetts-specific applied work. It should not hide behind a large random question count. Look for disclosed topic coverage, separate timed modes, current source citations, calculation steps, and explanations for why distractors fail.

Part II's published outline allocates questions this way:

| Part II subject | Published items | What to practice | | --- | ---: | --- | | Circuit calculations / Ohm's law | 5 | Formula choice, units, arithmetic and checking reasonableness | | Electrical schematics and plans | 5 | Symbols, circuit tracing, schedules and plan interpretation | | Materials and components | 5 | Identification, ratings, applications and limitations | | Troubleshooting and testing | 6 | Symptoms, safe test sequence, meter interpretation and fault isolation | | Massachusetts amendments | 5 | State changes to the national Code | | Licensing laws and regulations | 4 | Board rules, scope, supervision and legal requirements |

That means 15 of 30 applied questions are assigned to schematics, materials, and troubleshooting. An NEC-only question bank cannot simulate that distribution. It also means state material accounts for nine published items—enough to decide a close result.

For Part I, train fast Code classification and accurate lookups. If calculations are costing points, repair individual routes with the NEC load calculation guide, Table 310.16 ampacity walkthrough, and box fill practice before using another full mock.

Which references should you use while practicing?

Practice with the exact references and markings you expect to use at PSI. The current bulletin lists the Massachusetts Electrical Code amendments, 237 CMR Board regulations, Massachusetts General Laws Chapter 141, and the National Electrical Code for Part I. Part II lists the state amendments, NEC, and NFPA 72 among its allowed references.

Do not assume that “open book” means unrestricted. Massachusetts publishes a specific materials-allowed examination policy covering book formats, markings, loose papers, notes, and exam-room writing. The policy permits certain highlighting and tabs but rejects answer notes, worked calculation steps, wiring diagrams, and other prohibited additions.

Use this pre-purchase and exam-week check:

• Confirm the tested Code and state amendment cycle in the live bulletin.
• Obtain every permitted state reference you actually plan to use.
• Remove loose inserts and prohibited notes.
• Make sure tabs, highlighting, and underlining comply with Board policy.
• Practice locating 237 CMR and Chapter 141 rules, not just NEC articles.
• Reproduce the same physical reference setup during timed mocks.

Build lookup speed with the open-book NEC exam strategy, but let Massachusetts policy—not a prep provider—decide what you carry into the test center.

How fast do you need to answer the questions?

Part I gives an average of 2 minutes 15 seconds per question. Part II gives 2 minutes per question. Those averages include calculations and plan-reading items, so you need to bank direct questions quickly and flag slow work instead of letting one problem consume the section.

Try this Part I pacing framework:

| Phase | Time target | Job | | --- | ---: | --- | | First pass | 110 minutes | Answer direct knowledge and fast lookup questions | | Second pass | 50 minutes | Complete calculations and difficult references | | Final review | 20 minutes | Resolve flags, check units, exceptions and blanks |

For Part II, try 35 minutes for direct and short applied questions, 18 minutes for flagged calculations or plan items, and 7 minutes for review. These are training targets, not PSI rules. Adjust them after two full simulations while keeping the official section limits intact.

Record lookup time separately from calculation time. A wrong answer caused by using the wrong article needs different repair than a correct calculation that took five minutes. The timed NEC practice test plan gives you a simple way to track both.

How should you review Massachusetts practice-test answers?

Review every miss and every unsupported guess against the controlling reference. A strong explanation identifies the question clue, source, rule or formula, exception, correct answer, and reason each attractive distractor fails. Retest the same skill with a new question within 48 hours.

Use six error buckets:

1. Wrong NEC route or state-reference route.
2. Missed exception or Massachusetts amendment.
3. Calculation setup, arithmetic, or unit error.
4. Schematic or plan-reading error.
5. Troubleshooting sequence or component knowledge gap.
6. Misread wording or poor time decision.

Your study plan should follow the largest bucket. If six questions were lost to slow Code navigation and one to Ohm's law, another evening of formulas is comfortable avoidance—not useful exam prep.

What is a practical 14-day Massachusetts exam prep plan?

Use the first week to establish the correct reference setup and repair weak categories. Use the second week to combine both exam parts under realistic timing. Preserve fresh full mocks for the end instead of burning through them before your weaknesses change.

| Days | Main work | Evidence required | | --- | --- | --- | | 1–2 | Read the current bulletin, prepare legal references, take separate diagnostics | Ranked Part I and Part II error lists | | 3–5 | Drill the two weakest NEC routes and one calculation route | Fresh questions solved with correct citations | | 6–7 | Train Massachusetts amendments, 237 CMR, and Chapter 141 | Faster state-reference lookups | | 8–9 | Drill schematics, materials, troubleshooting and testing | Fewer applied misses under a timer | | 10–11 | Take timed 40-question Code sets and 15-question applied sets | Stable pace with shrinking guess count | | 12–13 | Simulate the full 80-question and 30-question parts | Passing scores with a safety margin | | 14 | Light repair and appointment/reference check | No unresolved repeat error; compliant books ready |

Massachusetts currently lists 600 hours of Board-approved education, a 15-hour Code-update class, and 8,000 hours of work over at least four years under a Massachusetts licensed journeyman among the qualification requirements. Confirm your eligibility and documentation on the official application page before spending money on test prep.

How do you choose Massachusetts electrician test prep?

Choose prep that states which Massachusetts exam parts, current references, and outline topics it covers. Demand worked explanations and realistic timers. Avoid any product that markets thousands of questions but cannot show state-law coverage, applied questions, Code citations, or a mapping to the official bulletin.

| Prep feature | Buy when | Walk away when | | --- | --- | --- | | Exam alignment | Both Massachusetts parts are named and mapped | It says only “journeyman exam” | | References | Current NEC/state sources are disclosed | Code edition or state coverage is vague | | Explanations | Rules, calculations and distractors are explained | You get only an answer letter | | Timing | 80/180 and 30/60 simulations are available | Every quiz is untimed | | Analytics | Misses and guesses can be reviewed by category | Only the highest score is shown | | Applied prep | Plans, components and troubleshooting appear | Question bank is NEC trivia only |

Start with the free diagnostic to expose your weakest NEC categories. Then use structured journeyman electrician exam prep for worked explanations and timed practice, while keeping the Massachusetts bulletin and Board sources beside your plan as the final authority.

When are you ready for the Massachusetts journeyman exam?

You are ready when both parts pass repeatedly under their own time limits, your references comply with current rules, and your scores do not depend on lucky guesses. One strong Part I score cannot compensate for an untrained applied portion.

• Three recent Part I simulations clear 70% with a safety margin.
• Three recent Part II simulations clear 70% with a safety margin.
• You finish both sections with review time.
• Repeat misses in Massachusetts amendments and licensing rules are shrinking.
• Calculation answers include correct units and reasonable-value checks.
• Your Code and state references match the current bulletin.
• Your books and markings satisfy the exam-room policy.
• Your PSI eligibility, appointment, identification, and route are confirmed.

FAQ

How many questions are on the Massachusetts journeyman electrician exam?

The current bulletin lists two parts: Part I has 80 questions in 180 minutes, and Part II has 30 questions in 60 minutes. Each part requires 70% to pass.

Is the Massachusetts journeyman electrician exam open book?

The bulletin lists specific references allowed at the examination center, including Massachusetts amendments, Board regulations, Massachusetts law, and the NEC. Reference preparation and security restrictions still apply, so check the current bulletin before testing.

What is tested on Part II of the Massachusetts journeyman exam?

The applied portion covers circuit calculations, electrical schematics and plans, materials and components, troubleshooting and testing, Massachusetts amendments, and licensing laws and regulations.

What score do you need to pass the Massachusetts journeyman electrician exam?

The bulletin sets a 70% passing score for each part: 56 correct answers out of 80 on Part I and 21 correct answers out of 30 on Part II.

What should a Massachusetts journeyman electrician practice test include?

It should separately train the 80-question Code portion and the 30-question applied portion, use current Massachusetts references, reproduce the real time limits, and explain every answer with the controlling source or calculation route.